Model Number

G600

The function of G600:
1. Multi opening  ways
2. Electronic limit switches
3. Automatic safety reverse
4. 3 minutes light delay
5. Manual release in case of power failure
6. Chain drive, low noise
7. Soft start, soft stops
8. Backup battery function (optional

TECHNICAL DATA:

INPUT VOLTAGE: 220/230V AC 50Hz
(110v AC 60Hz or 127V AC 60Hz available on request)
Single Phase
Current Required 1Amp

TRANSFORMER SEPC: Primary Voltage 220/230V AC
WORKING CIRCUMSTANCE: TEMPERATURE: -20°C~55°C
RELATIVE HUMIDITY: <90%
MOTOR SPEC: Motor Type Permanent Magnet D.C. Motor
Voltage 24V DC
Torque 150 kg.cm at 4 Amps
CONTROL BOARD SPEC: Relay Contact Rating 30 Amp / 30V DC
Relay Coil Voltage 24V DC
Control Board Voltage 24V DC / 5V DC
Light Glove Voltage 220v ac 15 watts Max.
Receiver specification Receiver type FSK AM
(Built-in) RF Frequency 433.92MHz
Code Storage Capacity 20Different codes
Control distance 50m max.
TRANSMITTER SPEC Carrier Frequency 433.92MHz
Current Consumption 50mA (approx)
Battery Voltage 12 Volts A23 battery
Coding Format Rolling Code(7.38??019 Combinations)
MODEL: ET-GD-600 /ET-GD-800 /ET-GD-1000